User:TheAnarcat: Difference between revisions

From Amateur Radio Wiki
Jump to navigation Jump to search
Line 46: Line 46:
!colspan="5"|Parts missing
!colspan="5"|Parts missing
|-
|-
| 15' 1" fiberglass  || 8    || [http://www.mgs4u.com/fiberglass-cubical-quad-spreaders.htm mgs4u.com] (ordered) || ~160$  || unit price 17.10$ - use the type 1L because the type 1 doesn't fit in the 5-way PVC connector
| 15' 1" fiberglass  || 8    || [http://www.mgs4u.com/fiberglass-cubical-quad-spreaders.htm mgs4u.com] (ordered) || ~160$  || unit price 17.10$ - <s>use the type 1L because the type 1 doesn't fit in the 5-way PVC connector</s> need to switch to type 1!!!
|-
|-
| U clamps and bolts || 4    || home depot || ? || for the beam/pole fitting
| U clamps and bolts || 4    || <s>home depot</s> Rick Adams || 0$ || included in the beam/pole fitting
|-
|-
| 4m 1"PVC          || 1    || home depot || ? || or aluminium?
| boom/pole plate    || 1    || Rick Adams  || 54$ || need to drill holes, includes reinforcement pole
|-
|-
| plywood            || 6'x5' || home depot || 5$? || 1' x 2' used for the beam/pole fitting
| plywood            || 6'x5' || home depot || 5$? || <s>1' x 2' used for the beam/pole fitting</s>
|-
| 4m aluminium boom  || 1    ||  [http://www.dxengineering.com/Parts.asp?ID=5099&PLID=364&SecID=136&DeptID=43&PartNo=DXE-AT1484 this]?
|-
|-
| welding wire aluminium || 270' spool || [http://www.canadiantire.ca/AST/browse/6/Tools/WeldingSoldering/AccessoriesRodsWire.jsp canadian tire]? || ? || example: [http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Aluminum-Alloy/Alloy-5356-MIG.aspx Aluminium 5356 MIG alloy]
| welding wire aluminium || 270' spool || [http://www.canadiantire.ca/AST/browse/6/Tools/WeldingSoldering/AccessoriesRodsWire.jsp canadian tire]? || ? || example: [http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Aluminum-Alloy/Alloy-5356-MIG.aspx Aluminium 5356 MIG alloy]
|-
|-
| 5-way 1"PVC conn.  || 2   || [http://www.creativeshelters.com/Fittings/PVC-Structure-Fitting.aspx creativeshelters.com] || 3.08$ || couldn't order, they don't accept canadian zip codes, and shipping is 30$ anyways
| spider            || 2     || [http://www.rickadams.net/ Rick Adams] || ~40$ ea. || seems strong and sturdy, and Rick helped me through email, let's try!
|+
|+
!colspan="5"|Discarded approaches
!colspan="5"|Discarded approaches
|-
| <s>4m 1"PVC</s>          || 1    || home depot || ? || according to Rick, this could create interference
|-
| <s>5-way 1"PVC conn.</s>  || 2    || [http://www.creativeshelters.com/Fittings/PVC-Structure-Fitting.aspx creativeshelters.com] || 3.08$ || couldn't order, they don't accept canadian zip codes, and shipping is 30$ anyways, and I don't trust PVC
|-
|-
| <s>1"x½" copper pipe</s>  || 8    || home depot || ~5$ || we'll use tie-wraps instead for spreader/wire attachment
| <s>1"x½" copper pipe</s>  || 8    || home depot || ~5$ || we'll use tie-wraps instead for spreader/wire attachment
Line 77: Line 83:
=== Current blocker(s) ===
=== Current blocker(s) ===


* shipping: waiting for the fiberglass to be shipped - **oops!** got the wrong spreaders if i'm going with Rick's spreaders, as Rick's are 0.995"OD and 0.812"ID - the idea is that the spreader would fit *around* the spider's legs, so I need the Type 1 spreader instead of type 1L. anyways, the type 1 i stronger
* shipping: waiting for the fiberglass to be shipped -  
* spider: can't find 5-way connectors anywhere, and worried about the solidity of PVC, considering [http://www.rickadams.net/ Rick Adam's] spider hubs (40$ ea.) or custom-made, like [http://www.iol.ie/~bravo/Cubical%20Quad.htm this]
* spreaders: **oops!** got the wrong spreaders if i'm going with Rick's spreaders, as Rick's are 0.995"OD and 0.812"ID - the idea is that the spreader would fit *around* the spider's legs, so I need the Type 1 spreader instead of type 1L. anyways, the type 1 i stronger
* <s>spider: can't find 5-way connectors anywhere, and worried about the solidity of PVC, considering [http://www.rickadams.net/ Rick Adam's] spider hubs (40$ ea.) or custom-made, like [http://www.iol.ie/~bravo/Cubical%20Quad.htm this]</s> going with rick if we can arrange on shipping
* boom: would prefer aluminium, like [http://www.dxengineering.com/Parts.asp?ID=5099&PLID=364&SecID=136&DeptID=43&PartNo=DXE-AT1484 this] (7$ + shipping), anything local?
* boom: would prefer aluminium, like [http://www.dxengineering.com/Parts.asp?ID=5099&PLID=364&SecID=136&DeptID=43&PartNo=DXE-AT1484 this] (7$ + shipping), anything local?
* attachment plate: plywood just won't cut it, maybe [http://www.dxengineering.com/Parts.asp?ID=1075&PLID=186&SecID=1&DeptID=39&PartNo=DXE-MMP-P3 this]? (~12$, need to drill holes) or any aluminium plate - rick has some, ~50$ including clamps
* attachment plate: plywood just won't cut it, maybe [http://www.dxengineering.com/Parts.asp?ID=1075&PLID=186&SecID=1&DeptID=39&PartNo=DXE-MMP-P3 this]? (~12$, need to drill holes) or any aluminium plate - rick has some, ~50$ including clamps

Revision as of 17:14, 8 May 2011

I am anarcat and i hope i'm not screwing things up here too much. :)

I just passed my basic qualitification in Canada, with honors (so I can operate HF), yay! I am now AKA VA2ANK. -- TheAnarcat 21:50, 10 October 2010 (CDT)

My rig

I uploaded a few photos in this album.

New quad antenna project

A sketch of my antenna

I am working on building a new antenna, pictured right. It is based on this design, which uses a mix of PVC pipes and fiberglass rods, except I adapt it to a 20m antenna.

Here's my parts list.

Part Amount Where Price Notes
Parts on hand
tripod 1 addison (done) 45.56$ ~2' x 2'
3m steel pole 1 downstairs 0$ to connect the beam and tripod, 1-1¼"
sandbags 3 home depot (done) 10.76$ one per leg
hose clamps 8 home depot ~15$ unit price ~2$
8"x½" plastic tube 1 home depot (done) ~2$ for spreader/wire attachment
Parts missing
15' 1" fiberglass 8 mgs4u.com (ordered) ~160$ unit price 17.10$ - use the type 1L because the type 1 doesn't fit in the 5-way PVC connector need to switch to type 1!!!
U clamps and bolts 4 home depot Rick Adams 0$ included in the beam/pole fitting
boom/pole plate 1 Rick Adams 54$ need to drill holes, includes reinforcement pole
plywood 6'x5' home depot 5$? 1' x 2' used for the beam/pole fitting
4m aluminium boom 1 this?
welding wire aluminium 270' spool canadian tire? ? example: Aluminium 5356 MIG alloy
spider 2 Rick Adams ~40$ ea. seems strong and sturdy, and Rick helped me through email, let's try!
Discarded approaches
4m 1"PVC 1 home depot ? according to Rick, this could create interference
5-way 1"PVC conn. 2 creativeshelters.com 3.08$ couldn't order, they don't accept canadian zip codes, and shipping is 30$ anyways, and I don't trust PVC
1"x½" copper pipe 8 home depot ~5$ we'll use tie-wraps instead for spreader/wire attachment
8m ½"PVC 4 home depot ? PVC pipes are too flexible to hold properly, we need fiberglass
AUG 12 copper wire 44.4m ??? 29.32$ (addison?) 48.64$ pour 2x12 22m (dubo) addison doesn't have bare wire, and dubo only has bare up to 8 gage, too big (it's mainly for grounds) copper wire never comes bare, and i may have better luck finding mig soldering wire like Aluminium-5356

Total price: ~280$

Notes

  • Gauge: 10-16 AWG is okay (see AWG, that is 1.2-2.5mm or 1/10" - 1/20"), and can be insulated, according to this page
  • Using welding wire is a good idea, as the lightning bolt quad uses
  • I was suggested Dubo for electric supplies

Current blocker(s)

  • shipping: waiting for the fiberglass to be shipped -
  • spreaders: **oops!** got the wrong spreaders if i'm going with Rick's spreaders, as Rick's are 0.995"OD and 0.812"ID - the idea is that the spreader would fit *around* the spider's legs, so I need the Type 1 spreader instead of type 1L. anyways, the type 1 i stronger
  • spider: can't find 5-way connectors anywhere, and worried about the solidity of PVC, considering Rick Adam's spider hubs (40$ ea.) or custom-made, like this going with rick if we can arrange on shipping
  • boom: would prefer aluminium, like this (7$ + shipping), anything local?
  • attachment plate: plywood just won't cut it, maybe this? (~12$, need to drill holes) or any aluminium plate - rick has some, ~50$ including clamps

Références

Je collecte ici des bons sites au sujet du ham radio.

Software

This needs to be merged into Software 

  xplanet -latitude 45.5 -longitude -73.66 -wait 60 -label -projection azimuthal -fork -radius 90

  ibp FN35EM

... others to follow, there's a whole hamradio section in debian.

Stuff to buy next

Retrieved from "http://wiki.hamtools.org/index.php?title=User:TheAnarcat&oldid=4912"