TYT TH-UVF1 Manual: Difference between revisions

From Amateur Radio Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
Most people agree that the manual that comes with this radio is horrible. Let's try to create a better one.
Most people agree that the manual that comes with this radio is horrible. Let's try to create a better one.


* Modes
== Modes ==


Hold U/V to switch between manual tuning and preset mode. In channel preset mode there are two small numbers on the right. In manual tuning mode the numbers are not there.
Hold U/V to switch between manual tuning and preset mode. In channel preset mode there are two small numbers on the right. In manual tuning mode the numbers are not there.


* Saving a preset
== Saving a preset ==


Firstly, make sure you're in manual tuning mode. There should '''not''' be two small numbers on the right indicating the channel number. Hold U/V to switch if you're in preset mode.
Firstly, make sure you're in manual tuning mode. There should '''not''' be two small numbers on the right indicating the channel number. Hold U/V to switch if you're in preset mode.


You cannot load an existing preset, make a change and save it. You have to set all of the following parameters and then save it as is. So, make sure you get it right or you'll have to go through this again.
You cannot load an existing preset, make a change and save it. You have to set all of the following parameters and then save it as is. So, make sure you get it right or you'll have to go through this again.

Revision as of 10:19, 29 November 2011

Most people agree that the manual that comes with this radio is horrible. Let's try to create a better one.

Modes

Hold U/V to switch between manual tuning and preset mode. In channel preset mode there are two small numbers on the right. In manual tuning mode the numbers are not there.

Saving a preset

Firstly, make sure you're in manual tuning mode. There should not be two small numbers on the right indicating the channel number. Hold U/V to switch if you're in preset mode.

You cannot load an existing preset, make a change and save it. You have to set all of the following parameters and then save it as is. So, make sure you get it right or you'll have to go through this again.