Vertical antenna: Difference between revisions
(Vertical Antenna moved to Vertical Antenna efficiency: Need more general-purpose discussion under basic "vertical antenna" article.) |
(First pass at an article on basic vertical antennas.) |
||
| Line 1: | Line 1: | ||
Vertical antennas, often simply known to amateurs as "verticals," are [[antenna|antennas]] in which the [[driven element]] is vertical. Most common verticals are simply a piece of wire or aluminum tubing mounted vertically, but others, such as those designed for [[mobile antenna|mobile]] use, are significantly more complex. | |||
== 1/4 wave Vertical == | |||
== 5/8 Wave Vertical == | |||
== 1/2 Wave Vertical == | |||
== Importance of Ground == | |||
=== Ground Radials === | |||
=== Elevated Ground Plane === | |||
== Efficiency == | |||
Refer to KE4UYP's [[Vertical Antenna efficiency]] article for more discussion. | |||
== Loaded Verticals == | |||
Antenna loading is the practice of shortening antennas to less than the length that [[resonance]] would normally require, then adding [[reactance|reactive elements]] to bring them back to resonance. They are very useful when the space a full-size antenna would require is not available. All verticals designed for mobile use must use some type of loading. | |||
See [[antenna loading]] for a detailed discussion. | |||
== Phased Vertical Arrays == | |||
Revision as of 18:35, 9 April 2008
Vertical antennas, often simply known to amateurs as "verticals," are antennas in which the driven element is vertical. Most common verticals are simply a piece of wire or aluminum tubing mounted vertically, but others, such as those designed for mobile use, are significantly more complex.
1/4 wave Vertical
5/8 Wave Vertical
1/2 Wave Vertical
Importance of Ground
Ground Radials
Elevated Ground Plane
Efficiency
Refer to KE4UYP's Vertical Antenna efficiency article for more discussion.
Loaded Verticals
Antenna loading is the practice of shortening antennas to less than the length that resonance would normally require, then adding reactive elements to bring them back to resonance. They are very useful when the space a full-size antenna would require is not available. All verticals designed for mobile use must use some type of loading.
See antenna loading for a detailed discussion.