Capacity hat
Related Wiki pages: Antennas, Electronic Theory
Capacity Hats
by Lou Rummel KE4UYP
Capacity hats will reduce the amount of inductance necessary to resonate the antenna, and increase bandwidth. But contrary to popular belief they add nothing to the radiation resistance. For a component of an antenna to increase radiation resistance it must itself radiate.
It is true if you put a Capacity hat on top of a short mobile antenna it will change the antennas efficiency but what happens is the current on the radiating element moves further up to the top.
Because the current is now further away from ground this lowers ground loss. So the ratio of radiation resistance to ground loss and Omni Loss resistance, which is the reduction in the amount of inductance needed for the loading coil, goes down.
Although it is true that the input impedance of antennas using Capacity Hats is higher than coil loaded antennas this is not an indication of an increase in radiation resistance, for the same reason that a folded dipole with 300 ohms impedance has the same radiation resistance as a standard 73 ohm dipole.
| Antennas | |
| Design | Beam * Dipole * Dish or Parabola * DDRR * Log Periodic (LPDA) * Loop * Mobile and portable * Omnidirectional * Panel * Quad and Quagi * Screwdriver * Small tuned loop * Vertical * Yagi-Uda * Wire and random wire antennas |
| Installation | Antenna Tuners * Capacity hats and loading coils * Cavity filters * Coaxial Cable * Feedlines * Rotators * Towers and Masts * VK2ACY - G5RV coupler |
| Theory | Front-to-back ratio * Impedance matching * SWR * Tower design * Vertical Antenna efficiency * Wire comparison tables |