Dipole

Dipole antennas are "two sided' in that they are fed from a point between the two ends. In is simplest form, a dipole will be centre fed, with the total length being the same as the frequency of transmission.

Simple centre fed dipole

Dipole length for resonance is calculated using either:

<math>L = \frac {468}{frequency(MHz)}</math> for total length in feet, or,

<math>L = \frac {285}{frequency(MHz)}</math> for total length in metres.

Half wave dipole

These are centre fed, but each arm is one quarter of the wavelength of the operating frequency.

Off Centre fed dipole (OCF dipole)

As the name suggests, the OCF dipole is not fed from the centre.

L is calculated from the formulae above. The dimensions D1, D2 and D3 are found using:

<math>D1 = 0.38L</math>

<math>D2 = 0.62L</math>

<math>D3 = 0.14L</math>

G5RV dipole

Whilst not strictly speaking a dipole like those described above, the G5RV - invented by Louis Varney - shares some physical characteristics with a centre fed dipole. the man difference betwee, a dipole and G5RV is that the "transmission line" of a G6RV is part of the radiating element, as well as being the matching section to allow operation over a number of bands. The G5RV was intended to be used with an antenna tuner.

Excellent analyses of the G5RV can be found here and here.Philip Grimshaw - VK4KVK has a comprehensive book on the G5RV, available here.