Echolink: Difference between revisions

From Amateur Radio Wiki
Jump to navigation Jump to search
m (added some info - need to add info on using echolink with a radio)
Line 7: Line 7:


As Echolink is an uses internet protocols for transmission of voice, various ports must be open in your firewall for it to operate properly, the Echolink website summarising the requirements thus:
As Echolink is an uses internet protocols for transmission of voice, various ports must be open in your firewall for it to operate properly, the Echolink website summarising the requirements thus:
- Allow UDP destination ports 5198-5199 between Internet and PC in both directions
* Allow UDP destination ports 5198-5199 between Internet and PC in both directions
- Allow TCP (source port any, destination port 5200) from PC to Internet
* Allow TCP (source port any, destination port 5200) from PC to Internet


Because the firewalls only allow port directs to particular IP addresses - and hence computers - Echolink can in most cases only be used on one computer at a time in a particular household. Some ISP's may allow multiple unique external IP addresses, in which case echolink can be used on multiple computers.
Because the firewalls only allow port directs to particular IP addresses - and hence computers - Echolink can in most cases only be used on one computer at a time in a particular household. Some ISP's may allow multiple unique external IP addresses, in which case echolink can be used on multiple computers.

Revision as of 00:58, 10 May 2008

Introduction

Echolink is a VOIP (Voice Over IP) application that allows amateurs to connect to one another using the internet. It is similar to IRLP, but allows users to connect via either radio or computer. Application versions are available for PC and Mac computers. Echolink is not usually described as a digital mode - although VOIP is digital transmission of voice - as most operators will use an FM radio to connect to the echolink network.


Using Echolink on a computer

As Echolink is an uses internet protocols for transmission of voice, various ports must be open in your firewall for it to operate properly, the Echolink website summarising the requirements thus:

  • Allow UDP destination ports 5198-5199 between Internet and PC in both directions
  • Allow TCP (source port any, destination port 5200) from PC to Internet

Because the firewalls only allow port directs to particular IP addresses - and hence computers - Echolink can in most cases only be used on one computer at a time in a particular household. Some ISP's may allow multiple unique external IP addresses, in which case echolink can be used on multiple computers.

The Echolink application presents a window such as the one below to the user.

VK4YEH EchoLink.png