Gain: Difference between revisions

From Amateur Radio Wiki
Jump to navigation Jump to search
(decibels)
(optical gain)
Line 17: Line 17:
<math> 10 \times \log \left( \frac {3}{1} \right)  = 4.77\mbox{dBD} </math>
<math> 10 \times \log \left( \frac {3}{1} \right)  = 4.77\mbox{dBD} </math>


===Gain compared to an isotropic readiator = dBi ===
===Gain compared to an isotropic radiator = dBi ===


An isotropic radiator is a theoretical "point source" antenna that radiates the same amount of energy in all directions.  Although an isotropic antenna cannot be constructed, it is sometimes useful to compare actual antennas to it.
An isotropic radiator is a theoretical "point source" antenna that radiates the same amount of energy in all directions.  Although an isotropic antenna cannot be constructed, it is sometimes useful to compare actual antennas to it.
Line 30: Line 30:


hence, <math> dBi = dBD + 2.15 </math>
hence, <math> dBi = dBD + 2.15 </math>
===dBo Optical Gain===
dBO is an unofficial term used by some amateurs working with transmission of data using light. It refers to the apparent gain of an optical system compared to a point source of light.




{{electronics}}
{{electronics}}

Revision as of 21:15, 20 July 2009

Related wiki pages Antennas, Antenna Design, Decibels, Radiated Power Measurement, SWR

What is Gain?

Gain compared to a half wave dipole - dBD

The gain of an antenna is the relative increase in radiation at the maximum point expressed as a value in decibels (dB) above a standard. The standard to which other antennas are compared is usually a ½-wavelength dipole. The standard antenna is given a reference gain of 0dBD (zero decibel referenced to dipole). This comes from:

<math> \mbox{gain} = 10 \times \log \left( \frac {Pe}{Pi} \right) </math>

Where Pe is effective radiated power and Pi is input power

An antenna with the effective radiated power of three times the input power would therefore have a gain of:

Pe = 3, Pi = 1

<math> 10 \times \log \left( \frac {3}{1} \right) = 4.77\mbox{dBD} </math>

Gain compared to an isotropic radiator = dBi

An isotropic radiator is a theoretical "point source" antenna that radiates the same amount of energy in all directions. Although an isotropic antenna cannot be constructed, it is sometimes useful to compare actual antennas to it.

Comparison of dBD and dBi

Graphically, the radiation patterns of isotropic and dipole antennas - for equal power inputs - can be represented thus:

Vk4yeh dbi vs dbd.jpg

The area between the isotropic radiator circle and the half wave circle radiator circle represents a gain difference of approximately 2.15dB

hence, <math> dBi = dBD + 2.15 </math>

dBo Optical Gain

dBO is an unofficial term used by some amateurs working with transmission of data using light. It refers to the apparent gain of an optical system compared to a point source of light.


Electronic Theory
Physical quantities Current * Gain * Impedance * Power * Q of a circuit * Radiated Power Measurement * Reactance* Resistivity * Resonance * Voltage
Components Baluns * Bipolar-Junction Transistors * Capacitors * Diodes * Inductors* Lasers * Microphones * Resistors * Transformers * Wire
Circuits Attenuators * Digital Signal Processing (DSP) * Dummy load * Filters * LC filters * Power Supply Design * Rectifier Circuits
Design Amplifier Design * Oscillator Design
Electromagnetic Waves Relative power (Decibels) * Harmonics * Interference and BPL